LightTrans

Exhibitions and Seminars Archives

VirtualLab Fusion Technology and Applications: Interferometry, Microscopy and Fiber Coupling | Paris, France 09 April 2019

09 April 2019
Paris - Cedex, Créteil, France
Valeo Headquarters


Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems while providing all optical quantities and measures of concern with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. Discover the Fast Physical Optics concept with VirtualLab Fusion by means of seminar modules on technology and different applications. Join a specific module that you are interested in or stay for the lot, according to your preferences.

Seminar Schedule:

Overview: VirtualLab Fusion Technology
09:00 – 10:00

  • Understanding the limitations of ray optics modeling for innovative optical systems and the necessity of physical optics in typical cases of modern optics.
  • Discovering how field tracing technology overcomes common challenges of numerical complexity in physical optics computations.

Application I: Interferometry
10:00 – 10:45

  • Configuring various interferometric setups in VirtualLab Fusion, including Mach-Zehnder and Michelson interferometers.
  • Usage of non-sequential field tracing to simulate interference patterns including coherence and polarization.

Application II: Microscopy
11:00 – 11:45

  • Setting up different types of microscopes in VirtualLab Fusion including different source models.
  • Physical optics modeling of vectorial PSF, MTF and image simulations for microstructured samples.

Application III: Fiber Coupling
12:00 – 12:45

  • Design of lens systems for high-NA fiber coupling by parametric optimization.
  • Physical optics analysis of coupling efficiency and investigation of the influence of tolerances on the efficiency.

Register: www.lighttrans.com/seminarregistration

Use the following link to get more details:

VirtualLab Fusion Technology and Applications: Interferometry, Microscopy and Fiber Coupling | Tel Aviv, Israel 03 April 2019

03 April 2019
Tel Aviv, Israel
Hotel Dan Panorama Tel Aviv


Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems while providing all optical quantities and measures of concern with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. Discover the Fast Physical Optics concept with VirtualLab Fusion by means of seminar modules on technology and different applications. Join a specific module that you are interested in or stay for the lot, according to your preferences.

Seminar Schedule:

Overview: VirtualLab Fusion Technology
9:00 – 10:00

  • Understanding the limitations of ray optics modeling for innovative optical systems and the necessity of physical optics in typical cases of modern optics.
  • Discovering how field tracing technology overcomes common challenges of numerical complexity in physical optics computations.

Application I: Interferometry
10:00 – 10:45

  • Configuring various interferometric setups in VirtualLab Fusion, including Mach-Zehnder and Michelson interferometers.
  • Usage of non-sequential field tracing to simulate interference patterns including coherence and polarization.

Application II: Microscopy
11:00 – 11:45

  • Setting up different types of microscopes in VirtualLab Fusion including different source models.
  • Physical optics modeling of vectorial PSF, MTF and image simulations for microstructured samples.

Application III: Fiber Coupling
12:00 – 12:45

  • Design of lens systems for high-NA fiber coupling by parametric optimization.
  • Physical optics analysis of coupling efficiency and investigation of the influence of tolerances on the efficiency.

Register: www.lighttrans.com/seminarregistration

Use the following link to get more details:

OASIS 7 – Exhibition on Optics and Electro-Optics | Tel Aviv, Israel 1 – 2 April 2019

1 – 2 April 2019
Tel Aviv, Israel
OptecNet community booth #17

OASIS 7 – Exhibition on Optics and Electro-Optics | Tel Aviv, Israel 1 – 2 April 2019

1 – 2 April 2019
Tel Aviv, Israel
OptecNet community booth #17


This is a great chance for you to meet our technical experts and sales representatives for a discussion about the various technology and application possibilities of the Fast Physical Optics Software VirtualLab Fusion.


After the exhibition we offer the chance to take part in the following LightTrans event:


In addition, we will give two talks at the conference:

And please take a look at our posters:

 

Visit the exhibition website.

VirtualLab Fusion Technology and Applications: Interferometry, Microscopy and Fiber Coupling | Wetzlar, Germany 27 February 2019

27 February 2019
Wetzlar, Germany
Rittal Arena


Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems while providing all optical quantities and measures of concern with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. Discover the Fast Physical Optics concept with VirtualLab Fusion by means of seminar modules on technology and different applications. Join a specific module that you are interested in or stay for the lot, according to your preferences.

Seminar Schedule:

Overview: VirtualLab Fusion Technology
9:00 – 10:00

  • Understanding the limitations of ray optics modeling for innovative optical systems and the necessity of physical optics in typical cases of modern optics.
  • Discovering how field tracing technology overcomes common challenges of numerical complexity in physical optics computations.

Application I: Interferometry
10:00 – 10:45

  • Configuring various interferometric setups in VirtualLab Fusion, including Mach-Zehnder and Michelson interferometers.
  • Usage of non-sequential field tracing to simulate interference patterns including coherence and polarization.

Application II: Microscopy
11:00 – 11:45

  • Setting up different types of microscopes in VirtualLab Fusion including different source models.
  • Physical optics modeling of vectorial PSF, MTF and image simulations for microstructured samples.

Application III: Fiber Coupling
12:00 – 12:45

  • Design of lens systems for high-NA fiber coupling by parametric optimization.
  • Physical optics analysis of coupling efficiency and investigation of the influence of tolerances on the efficiency.

Register: www.lighttrans.com/seminarregistration

Use the following link to get more details:

W3 FAIR + CONVENTION | Wetzlar, Germany 25 – 26 February 2019

25 – 26 February 2019
Wetzlar, Germany
Thuringian community booth, E18a

W3 FAIR + CONVENTION | Wetzlar, Germany 25 – 26 February 2019

25 – 26 February 2019
Wetzlar, Germany
Thuringian community booth, E18a

This is a great chance for you to meet our technical experts and sales representatives for a discussion about the various application possibilities of the Fast Physical Optics Software VirtualLab Fusion.

Do not miss:


Visit the exhibition website.

VirtualLab Fusion Technology and Applications: Interferometry, Microscopy and Fiber Coupling | Vienna, Austria 19 February 2019

19 February 2019
Vienna, Austria
BioCenter 5, University of Vienna


Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems while providing all optical quantities and measures of concern with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. Discover the Fast Physical Optics concept with VirtualLab Fusion by means of seminar modules on technology and different applications. Join a specific module that you are interested in or stay for the lot, according to your preferences.

Seminar Schedule:

Overview: VirtualLab Fusion Technology
9:00 – 10:00

  • Understanding the limitations of ray optics modeling for innovative optical systems and the necessity of physical optics in typical cases of modern optics.
  • Discovering how field tracing technology overcomes common challenges of numerical complexity in physical optics computations.

Application I: Interferometry
10:00 – 10:45

  • Configuring various interferometric setups in VirtualLab Fusion, including Mach-Zehnder and Michelson interferometers.
  • Usage of non-sequential field tracing to simulate interference patterns including coherence and polarization.

Application II: Microscopy
11:00 – 11:45

  • Setting up different types of microscopes in VirtualLab Fusion including different source models.
  • Physical optics modeling of vectorial PSF, MTF and image simulations for microstructured samples.

Application III: Fiber Coupling
12:00 – 12:45

  • Design of lens systems for high-NA fiber coupling by parametric optimization.
  • Physical optics analysis of coupling efficiency and investigation of the influence of tolerances on the efficiency.

Register: www.lighttrans.com/seminarregistration

Use the following link to get more details:

Beyond Ray Tracing: Innovative Optical Design with Fast Physical Optics | San Francisco 08 February 2019

08 February 2019
San Francisco, CA 94103, USA
49 Geary Street

Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. This is precisely what VirtualLab Fusion offers: come to our free seminar to discover the Fast Physical Optics concept, how to benefit from it through our user-friendly GUI, and to get an overview of what it can achieve in a wide-ranging set of applications!

Seminar Schedule:

Concepts, techniques, and customization
9:00 – 12:00

  • Introduction to the theory and concepts of fast physical optics
  • Modeling techniques in VirtualLab Fusion
  • Design methods for diffractive, refractive, and hybrid optical components and systems
  • VirtualLab Fusion user-interface concept, tools,
    customization and programming

Applications and software demonstrations
13:00 – 16:00

  • Discussion and demonstration of application examples out of a collection of numerous VirtualLab Fusion use cases
  • Insights into the functionality and usage of VirtualLab Fusion through use cases
  • Questions & answers on how VirtualLab Fusion can provide the solution you seek

Register: www.lighttrans.com/seminarregistration

Use the following link to get more details:

VirtualLab Fusion Technology and Applications: Interferometry, Microscopy and Fiber Coupling | San Francisco 07 February 2019

07 February 2019
San Francisco, CA 94103, USA
49 Geary Street

Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems while providing all optical quantities and measures of concern with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. Discover the Fast Physical Optics concept with VirtualLab Fusion by means of seminar modules on technology and different applications. Join a specific module that you are interested in or stay for the lot, according to your preferences.

Seminar Schedule:

Overview: VirtualLab Fusion Technology
9:00 – 10:00

  • Understanding the limitations of ray optics modeling for innovative optical systems and the necessity of physical optics in typical cases of modern optics.
  • Discovering how field tracing technology overcomes common challenges of numerical complexity in physical optics computations.

Application I: Interferometry
10:00 – 10:45

  • Configuring various interferometric setups in VirtualLab Fusion, including Mach-Zehnder and Michelson interferometers.
  • Usage of non-sequential field tracing to simulate interference patterns including coherence and polarization.

Application II: Microscopy
11:00 – 11:45

  • Setting up different types of microscopes in VirtualLab Fusion including different source models.
  • Physical optics modeling of vectorial PSF, MTF and image simulations for microstructured samples.

Application III: Fiber Coupling
12:00 – 12:45

  • Design of lens systems for high-NA fiber coupling by parametric optimization.
  • Physical optics analysis of coupling efficiency and investigation of the influence of tolerances on the efficiency.

Register: www.lighttrans.com/seminarregistration

Use the following link to get more details:

1 2 3 4
Contact & Trial

LightTrans

Phone +49.3641.53129-44

info (at) lighttrans.com

 

VirtualLab Fusion

Get free trial version

Get an offer