LightTrans

What’s new?

Meet us in the USA this October

[October 04, 2018]
Meet us in USA this October
[October 04, 2018]

Meet us in USA this October

Learn from our optical engineering experts how to use VirtualLab Fusion efficiently.
Register for our hands-on training in Santa Clara and our seminars in Santa Clara & Tucson.

Training in Santa Clara | California
15 – 19 October 2018
Seminar in Santa Clara | California
22 October 2018
Seminar in Tucson | Arizona
26 October 2018

Meet us in USA this October
Read more

Grating Diffraction and Polarization Conversion

[October 02, 2018]
Gratings are widely used for various applications such as spectrometers, near-eye display system, etc. In the Grating Toolbox of VirtualLab, grating structures can be easily configured with the user-friendly software interface, and they can be rigorously analyzed by using the Fourier modal method (FMM).
[October 02, 2018]

Gratings are widely used for various applications such as spectrometers, near-eye display system, etc. In the Grating Toolbox of VirtualLab, grating structures can be easily configured with the user-friendly software interface, and they can be rigorously analyzed by using the Fourier modal method (FMM).

Gratings are widely used for various applications, such as spectrometers, near-eye display systems, etc. In the Grating Toolbox of VirtualLab, grating structures can be easily configured through a user-friendly software interface, and they can be rigorously analyzed using the Fourier modal method (FMM). This enables not only the calculation of diffraction efficiencies but also the investigation of polarization effects. For example, the polarization conversion for light diffraction at a sub-wavelength grating is investigated, and the results obtained from VirtualLab show good agreement with the reference.

Gratings are widely used for various applications such as spectrometers, near-eye display system, etc. In the Grating Toolbox of VirtualLab, grating structures can be easily configured with the user-friendly software interface, and they can be rigorously analyzed by using the Fourier modal method (FMM).
Read more

FREE VirtualLab Seminars in Delft (Netherlands) & Seoul (Korea)

[September 26, 2018]
Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. This is precisely what VirtualLab Fusion offers: come to our free seminar to discover the fast physical optics concept, how to benefit from it through our user-friendly GUI, and an overview of what it can provide in a wide-ranging set of applications!
[September 26, 2018]

Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. This is precisely what VirtualLab Fusion offers: come to our free seminar to discover the fast physical optics concept, how to benefit from it through our user-friendly GUI, and an overview of what it can provide in a wide-ranging set of applications!

Delft | Netherlands - 8 October
Seoul | Korea - 16 November


Meet our experts and learn how to use VirtualLab Fusion
for the optical design tasks in your field of application.
Register for the seminars and indicate your areas of interest.
This information will be used to shape the content of the session.

Modern optical technology has so branched out from traditionally understood lens systems that ray optics often falls short when it comes to simulating and designing cutting-edge optical systems with acceptable accuracy. A software package that yields fast physical optics simulation results alongside ray tracing then becomes, not a choice, but a necessity. This is precisely what VirtualLab Fusion offers: come to our free seminar to discover the fast physical optics concept, how to benefit from it through our user-friendly GUI, and an overview of what it can provide in a wide-ranging set of applications!
Read more

Analysis of Imaging Systems: Wavefront Error & Effect of Apertures

[September 25, 2018]
Imaging systems can be found in various optical applications and they may appear in different configurations. Such systems can be easily setup in VirtualLab Fusion and their performance can be analyzed by using e.g. the wavefront error detector. Especially, the apertures in system is known to have an influence on the imaging quality. VirtualLab can handle the aperture effects properly and take them into consideration for the PSF/MTF calculation. As an example, such effects are demonstrated with a human eye model.
[September 25, 2018]

Imaging systems can be found in various optical applications and they may appear in different configurations. Such systems can be easily setup in VirtualLab Fusion and their performance can be analyzed by using e.g. the wavefront error detector. Especially, the apertures in system is known to have an influence on the imaging quality. VirtualLab can handle the aperture effects properly and take them into consideration for the PSF/MTF calculation. As an example, such effects are demonstrated with a human eye model.

Imaging systems can be found in various optical applications and they may appear in different configurations.

Such systems can be easily set up in VirtualLab Fusion and their performance can be analyzed with e.g. the wavefront error detector. Especially, apertures in system are known to have an influence on imaging quality. VirtualLab can handle aperture effects properly and take them into consideration for the PSF/MTF calculation. As an example, such effects are demonstrated with a human eye model.

Imaging systems can be found in various optical applications and they may appear in different configurations. Such systems can be easily setup in VirtualLab Fusion and their performance can be analyzed by using e.g. the wavefront error detector. Especially, the apertures in system is known to have an influence on the imaging quality. VirtualLab can handle the aperture effects properly and take them into consideration for the PSF/MTF calculation. As an example, such effects are demonstrated with a human eye model.
Read more

VirtualLab Training in Santa Clara | USA (15-19 October 2018)

[September 19, 2018]
Analysis & Design of Diffractive & Micro-Optical Systems
[September 19, 2018]

Analysis & Design of Diffractive & Micro-Optical Systems

Learn from our optical engineering experts how to use VirtualLab Fusion efficiently.
Register for our training courses in Santa Clara. Fit it to your needs and time schedule:

2-day course
"Introduction to VirtualLab Fusion"
3-day course
"Analysis and Design of Diffractive and Micro-Optical Systems"
5-day course
The full 5-day training combines the content of the 2-day and 3-day courses.

Analysis & Design of Diffractive & Micro-Optical Systems
Read more

Modeling of Graded-Index Media

[September 18, 2018]
In optics, several effects, like the air turbulence or thermal effects in laser, may cause modulations in the refractive index, and lead to the so-called graded-index (GRIN) media. Such media are found useful in applications e.g. flat lens, reducing aberrations, and fibers. The modeling of light propagation through GRIN media is therefore important for practical optical simulation and design. In VirtualLab Fusion, an efficient modeling technology has been implemented, which is suitable in the cases of e.g. GRIN lens and GRIN fiber modeling.
[September 18, 2018]

In optics, several effects, like the air turbulence or thermal effects in laser, may cause modulations in the refractive index, and lead to the so-called graded-index (GRIN) media. Such media are found useful in applications e.g. flat lens, reducing aberrations, and fibers. The modeling of light propagation through GRIN media is therefore important for practical optical simulation and design. In VirtualLab Fusion, an efficient modeling technology has been implemented, which is suitable in the cases of e.g. GRIN lens and GRIN fiber modeling.

In optics, several effects like air turbulence or thermal effects in lasers may cause modulations in the refractive index which lead to so-called graded-index (GRIN) media.

This type of media can be useful in certain applications, e.g. flat lens, reducing aberrations and fibers. The modeling of light propagation through GRIN media is therefore important for practical optical simulations and design. In VirtualLab Fusion an efficient modeling technology has been implemented which is suitable in the cases of e.g. GRIN lens and GRIN fiber modeling.

In optics, several effects, like the air turbulence or thermal effects in laser, may cause modulations in the refractive index, and lead to the so-called graded-index (GRIN) media. Such media are found useful in applications e.g. flat lens, reducing aberrations, and fibers. The modeling of light propagation through GRIN media is therefore important for practical optical simulation and design. In VirtualLab Fusion, an efficient modeling technology has been implemented, which is suitable in the cases of e.g. GRIN lens and GRIN fiber modeling.
Read more

FREE VirtualLab Seminars & Talks (Berlin I Hannover I Nuremberg)

[September 13, 2018]
Beyond Ray Tracing: Innovative Optical Design with Fast Physical Optics
[September 13, 2018]

Beyond Ray Tracing: Innovative Optical Design with Fast Physical Optics

Berlin | Germany - 26 October
Nuremberg | Germany - 6 November
Hannover | Germany - 14 November



Meet our experts and learn how to use VirtualLab Fusion
for the optical design tasks in your field of application.
Register for the seminars and indicate your areas of interest.
This information will be used to shape the content of the session.

Beyond Ray Tracing: Innovative Optical Design with Fast Physical Optics
Read more

Import of Zemax Optical Systems and Export for CAD

[September 12, 2018]
VirtualLab Fusion offers a user-friendly interface with Zemax, with which one can import complete optical systems from Zemax with full three-dimensional position information and glass material definitions. That enables an efficient and flexible workflow for optical designers who have access to both software packages – one optical system analyzed with both Zemax and VirtualLab. On the other side, optical systems and components in VirtualLab can be exported into various computer aided design (CAD) formats, such as IGES and STL, which makes it convenient for possible further fabrication processes.
[September 12, 2018]

VirtualLab Fusion offers a user-friendly interface with Zemax, with which one can import complete optical systems from Zemax with full three-dimensional position information and glass material definitions. That enables an efficient and flexible workflow for optical designers who have access to both software packages – one optical system analyzed with both Zemax and VirtualLab. On the other side, optical systems and components in VirtualLab can be exported into various computer aided design (CAD) formats, such as IGES and STL, which makes it convenient for possible further fabrication processes.

VirtualLab Fusion offers a user-friendly interface with Zemax, with which the user can import complete optical systems from Zemax, including the full 3D position information and the definition of the glass materials.

This enables an efficient and flexible workflow for optical designers who have access to both software packages - one optical system, constructed once, and analyzed with both Zemax and VirtualLab. On another note, optical systems and components in VirtualLab can be exported into various computer-aided design (CAD) formats, such as IGES and STL, which makes it convenient for eventual further fabrication processes.

VirtualLab Fusion offers a user-friendly interface with Zemax, with which one can import complete optical systems from Zemax with full three-dimensional position information and glass material definitions. That enables an efficient and flexible workflow for optical designers who have access to both software packages – one optical system analyzed with both Zemax and VirtualLab. On the other side, optical systems and components in VirtualLab can be exported into various computer aided design (CAD) formats, such as IGES and STL, which makes it convenient for possible further fabrication processes.
Read more

Panel-Type Source and Its Use in Imaging System Analysis

[September 06, 2018]
Nowadays, panel-type display devices are widely used in different optical system, e.g., image projection systems. The panel-type source in VirtualLab can be used to model the light generated from such display devices conveniently, with direct access to parameters like pixel number and pixel pitch. With the help of the panel-type source, the performance of the projection lenses can be analyzed, by e.g. observing the spot grid distortion in the image plane, or by checking the angular/direction behavior of the system.
[September 06, 2018]

Nowadays, panel-type display devices are widely used in different optical system, e.g., image projection systems. The panel-type source in VirtualLab can be used to model the light generated from such display devices conveniently, with direct access to parameters like pixel number and pixel pitch. With the help of the panel-type source, the performance of the projection lenses can be analyzed, by e.g. observing the spot grid distortion in the image plane, or by checking the angular/direction behavior of the system.

Modern display devices (LCD) are widely used in different optical systems, e.g. image projection systems.

The panel-type source in VirtualLab can be used to model the light generated by such display devices conveniently. In order to configure the source a specific number of pixels and pixel pitch can be set. With the help of the panel-type source, the performance of the projection lenses can be analyzed, by e.g. observing the spot grid distortion in the image plane, or by checking the angular/direction behavior of the system.

Nowadays, panel-type display devices are widely used in different optical system, e.g., image projection systems. The panel-type source in VirtualLab can be used to model the light generated from such display devices conveniently, with direct access to parameters like pixel number and pixel pitch. With the help of the panel-type source, the performance of the projection lenses can be analyzed, by e.g. observing the spot grid distortion in the image plane, or by checking the angular/direction behavior of the system.
Read more

Beyond Ray Tracing - Delft, Netherlands/ Santa Clara, USA

[September 05, 2018]
Beyond Ray Tracing: Innovative Optical Design with Fast Physical Optics
[September 05, 2018]

Beyond Ray Tracing: Innovative Optical Design with Fast Physical Optics

Innovative Optical Design with Fast Physical Optics

FREE VirtualLab Fusion Seminar

Come to our free seminar to discover the fast physical optics concept, how to benefit from it through our user-friendly GUI, and to get an overview of what it can provide in a wide-ranging set of applications!

8 October 2018

Delft, Netherlands
Faculty of Applied Sciences, Building 22

-

22 October 2018

Santa Clara, CA, USA
ZGC Innocation Center

Beyond Ray Tracing: Innovative Optical Design with Fast Physical Optics
Read more
1 2 3 4 5
Contact & Trial

LightTrans

Phone +49.3641.53129-44

info (at) lighttrans.com

 

VirtualLab Fusion

Get free trial version

Get an offer